اگر متن زیر در رابطه با تغییر گروه ها صحیح باشه فایل مورد نظر با نام Chan_dahdi.conf.template است
;# Flash Operator Panel will parse this file for dahdi trunk buttons
;# AMPLABEL will be used for the display labels on the buttons
;# %c Dahdi Channel number
;# %n Line number
;# %N Line number, but restart counter
;# Example:
;# ;AMPLABEL:Channel %c - Button %n
;# For Dahdi/* buttons use the following
;# (where x=number of buttons to dislpay)
;# ;AMPWILDCARDLABEL(x):MyLabel
[channels]
language=en
; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=1-2
فایل chan_dahdi.cong حاوی اطلاعات زیر بود
[trunkgroups]
[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3
immediate=no
#include dahdi-channels.conf
#include chan_dahdi_additional.conf
حالا من باید برای جدا کردن خط ها در تماس های خروجی FXO کدام فایل را تغییر بدم؟ میترسم اشتباه کنم کل خطای شرکت قطع بشه
سپاسگذارم